Hey guys, We have a 601f and a 1048e, and we want the fastest possible
link between them. The 601f datasheet says it has 4x 10GE SFP+/SFP ports
and 4x 25GE/10GE SFP28/SFP+ Ultra Low Latency Slots. The 1048e datasheet
says it has 6x 40 GE QSFP+ ports ...
I have a new FS-224E running Firmware 6.2.1 and am trying to communicate
with a Cisco 2960X running IOS 15.2(4)E7 via SFP ports. I have
configured the FortiSwitch as a stand-alone. Connecting from RJ45 to
RJ45 between the switches, the communication ...
I am adding some more context here for everyone else. We just had a
similar problem but with a different fix. We connected a Cisco with
those multiple-use ports with an SFP stacked over a gigabit copper RJ45
port. The speed commands weren't available...
I figured it out. The FortiSwitch ports were statically set to
Full\Duplex where the Cisco wanted Auto. Only the SFPs on the
FortiSwitch are statically set the rest arent by default. I am certain
the smart move is to set both to Full and Duplex and n...
I believe virus scan at the port level. Better topology mapping and
security layer. You can manage your whole stack, firewall, switch, and
wireless from one spot for easier config, and then you are also dealing
with one support group if something hap...
