Hi I am having issues getting slaac to work on a fortigate 60C I have my
wan interface set with a static address. I have no issues pinging
services through ipv6 from the fortigate unit itself. But it will not
autoconfigure the units connected to the ...
I can try and explain what I am after. I have a /48 prefix assigned by
my ISP. This /48 prefix can be routed to me by putting it straight on
the vlan that connects to me, or by using a /64 link net. This link net
is not a part of my initial prefix. R...
Seems I was a bit quick there. It worked for a while. Now I am not able
to ping from the fortigate to ipv6 sites. The fortigate replies to ping
packets through ipv6 though.
There I got it working. I used the config i had on the internal side.
But on the cisco in front I put up an ipv6 linknet, on the vlan to the
fortigate. So i assigned on the cisco side. 2001:0:0:0::1/64 Then on the
fortigate 2001:0:0:0::2/64 I then us...
Thanks for the reply. I have tried to change the config for the internal
side so it matches your post. config ipv6 set ip6-allowaccess ping https
ssh set ip6-address 2001:000:000:1::1/64 set ip6-send-adv enable set
autoconf enable config ip6-prefix-l...
