Multi-site setup. Main site has an ASA 5506, site b has a 60F, site C
has an ASA 5506.Ever since adding the 60F into the mix we have had
problems with internal calling. All sites used to be 5506.The phone
server is at the Main site.IPSec tunnels are ...
I'll attempt a packet capture at the port, but based on the original
pcap there was no RTP traffic at all.FOS is latest, 7.2.1. I used the
following commands to disable SIP inspection.config system settingsset
sip-expectation disableset sip-nat-trace...
Thanks for the input. The tunnel policies are set to allow all traffic
so in theory whether it is SIP or RTP it should be going through. And
the LAN to LAN policy is set to allow all as well. All the phones at
site b are on the same subnet but they d...
