About SRC

SRC · 07-23-2015

Hi All, I have internal server that cannot setup IPv6 address, so I need translate IPv4 to IPv6 when interna server begin setup communicate with external(IPv6) and in nevertheless translate to IPv4 when external begin communicate with internal server...

SRC · 07-30-2015

Hi emnoc, Thanks you for advise, we use filter command below; diagnose debug disable diagnose debug flow filter clear diagnose debug flow filter6 clear diagnose debug flow show console enable diagnose debug flow show func enable diagnose debug flow f...

SRC · 07-23-2015

Hi Emnoc,Regarding your quesions,1> You need to define a vip46 with the ext-map-ip address and the mapped inside address ( are you using port fowards ? or 1to1 ? ) 1to1 2> than a policy46 to allow the traffic/services HTTP and ALL_ICMP6 NAT64 configu...

User Statistics

User Activity

How to NAT46 and NAT64 on firewall

Re: How to NAT46 and NAT64 on firewall

Re: How to NAT46 and NAT64 on firewall