We have two Internet links and want to have health monitoring to
failover from one to the other if there is an outage. What is the
difference between these two functions in FOS 5.6?[ul]config system
link-monitorconfig system virtual-wan-link -> confi...
I am presently scoping a network refresh at an HQ. Needs aren't too
crazy as most servers have been moved to the cloud, and will max out
around 200 users. My primary plan was to use FortiGate's in HA, perhaps
a FortSwitch at the edge using FortiLink,...
I'm curious if anyone has tried out one of the FortiSwitch with an HA
pair of FortiGates, using FortiLink to integrate the switch management
into the FortiGates. How much simpler does this make managing WAN,
VLANs, LAN routing, etc. versus using an H...
Has anyone had any experience with deploying an Fortinet firewall VM on
Azure in a VNet? I want to extend on-premise firewall policies and
protections to an RDS farm deployment in Azure (IaaS, hence VNet). Also,
anybody know if Fortinet has a schedul...
I just overcame an interesting issue last night with a remote office.
Unit is a FGT-60C running 4.3.18 with no significant changes made for a
long time. The relevant setup details:[ul]Domain VLAN and Guest VLAN
trunked to one switch port on FGT.3 WAN...
A while ago we implemented IP Address Threat Feeds and put them on DENY
firewall rules at a higher precedence than the allow rules for
Internet-facing services. This greatly reduced noise in the logs of
connections to Internet-facing services, and im...
So decided on going this route. I will note that the CLI documentation
for FOS 5.6 is not accurate on how to set the servers. config system
link-monitor edit "wan2" set srcintf "wan2" set server "4.2.2.6"
"8.8.4.4" "9.9.9.10" set gateway-ip set time...
The SIP session helper that is turned on by default on FortiGate often
causes more problems than it solves. Where I am using interoffice SIP, I
know I have it disabled and the same problem you are describing is one I
initially had when getting it goi...
Thanks emnoc. I want to move everything possible to public cloud, with
minimal on premise server(s). But I want to extend the security model
that I have across physical offices to what runs in the cloud. This
wasn't a huge concern for me when I start...
