Hi, we have a Fortigate 60C 4.0 MR3 with remote locations connected via
VPN through wan2 interface. On site where is the Fortigate, we have
multiple VLANs configured with the unit used for inter-VLAN routing. In
one of the VLANs there is a DHCP serve...
Just an update, it finally worked. The problem was in the 4.0 MR3
firmware. After upgrading to v5.0 GA patch 4, it worked from the very
first moment. Also, the firmware fixed some other bugs such as not
seeing some logs, etc. But that' s another topi...
Well all of that is enabled as it should be. Everything is set up as it
should be. So you can see my dilemma...it should work , but it doesn' t.
DHCP messages come on the wan2 ingress but don' t pass to the server
VLAN egress. All other traffic norma...
In my case, on the remote side (there' s a MikroTik router) the router
is statically routed via MPLS (about two hops away) to the FGT and has a
DHCP helper configured for the actual DHCP server. Should the MikroTik
maybe be configured differently? I ...
Thanks for the welcome and replay. By DHCP helper do you mean DHCP relay
agent? It already is enabled like in the following example: edit wan2
(interface from where DHCP Discovery messages originate) set
dhcp-relay-service enable set dhcp-relay-ip 1....
