Hello Guys I have this Fortinet configuration with HA active-passive
mode, and an aggregate was configured with port3 and port4 on the
fortinet side and in each Mellanox Switch that is in mlag mode (VPC in
Cisco), an 802.3ad LACP with two ports was c...
Hello Guys I am starting to study fortigate and I have simulated some
labs in GNS3 with good results, but now I am trying the following
configuration1 FW2 Switch core connected by LACP to the FW. The core
switches are in L3.1 ToR switch1 PC connected...
Hello This the message when running diagnose sniffer packet any "host
10.214.1.10 and icmp" 4 170.353201 lacp-core out 192.168.0.17 ->
10.214.1.10: icmp: net 8.8.8.8 unreachable170.353202 port7 out
192.168.0.17 -> 10.214.161.10: icmp: net 8.8.8.8 unr...
Hello Thanks for your comment The vlan is attached in aggregate Now I
create Network called VLAN 101 and add the segment with interface
vlan117Create a policyIncoming - VLAN 117Outgoing - Port1 (Port to
Internet)Source - AddressVLAN101Destination: Al...
