Hi, We will be deploying 2 firewalls behind a GWLB on AWS. We now need
to plan for integrating with the existing SDWAN connecting to on-prem
locations. Can we have one firewall as active for few branches and the
other one as active for the remaining....
We have Fortigates deployed which are behind a GWLB in AWS. Now we have
requirement to deploy a site to site tunnel from the firewall. Can we
configure a site to site tunnel from the same LAN interface which is
connecting to GWLB. If not should I ass...
We are trying to add objects to backup file and import onto the firewall
when ever we need make changes into the firewall config. There we see a
field of UUID which was existing for all the other objects. So when ever
we add a new object to config, s...
we have a site to site tunnel through which we are able to connect to
all the instances behind the firewall but cannot SSH, Ping or Https to
the firewall. Can you help by sharing how to get management access over
a vlan interface through IPSEC. Servi...
Hi Graham, As the tunnel has to be formed between two Private IPs as
peers so we cannot do it with TGW. Is it possible to build IPSEC over
GENEVE. The firewall doesn't have public IP on the interface, so we need
to consider either Direct connect or I...
Attached is the diagram with GWLB and TGW. The VPN attachment to TGW is
a S2S from On-prem. The interface of firewall in data subnet is private.
As there is a site to site tunnel from on-prem to TGW we will have
access from instances behind the on-pr...
Hi, consider object1 as existing object in config file and object2 is a
newly added object edit "object1"set uuid
59f16fe2-0fkd-51ed-8et1-e45a09bfa678set subnet 172.16.0.0
255.255.0.0nextedit "object2"set subnet 172.17.0.0 255.255.0.0next so if
I jus...
