Looks like I found a bug.The situation is a next.My customer have a
Forti 100D with 2 connected WAN interface and one PPOE interface
configured on port 10 for connectivity with VoIP provider. In static
route configured 2 routings to 0.0.0.0/0 for bot...
I temporary replaced this 100D with 200E, transferred configuration and
upgraded up to 7.2.14. Unfortunately, FortiGate behavior didn't
change... It work properly for about 2-2.5 minutes and change routing
for SIP traffic only to this specific IP to ...
I paid attention that Forti behavior changed after restart. But I can't
restart it many times, this is working system. I'll try to perform the
few tests tonight.
I can't find why SIP routing to specific IP is going to default gateway
only. I configured other SIP connection - it working properly. But SIP
to this specific IP, as I wrote, still going vi one of default
gateways...Thanks for any ideas
Higet router info routing allRouting table for VRF=0Codes: K - kernel, C
- connected, S - static, R - RIP, B - BGPO - OSPF, IA - OSPF inter
areaN1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2E1 -
OSPF external type 1, E2 - OSPF externa...
