PurposeThis article describes an example of configuration and
troubleshooting commands for SCTP multihoming through a FortiGate
cluster (FGCP).DiagramSCTP Server192.168.1.1/24 10.0.1.1/24
||Port1FortiGate clusterPort2|198.51.100.0/24 |Router||192.168...
DescriptionAnti-replay from IPsec phase2 is a local setting. It is not
negotiated between IPsec peers therefore it does not impact the
establishment of the tunnel.However, anti-replay could affect the
traffic through the tunnel, and could be the caus...
PurposeThis article describes how to configure SNMP to query via SNMP
the information from different Vdoms from an interface of the management
Vdom.Expectations, RequirementsTo query information for a specific Vdom,
the SNMP manager must add the Vdom...
DescriptionWhen source NAT is not activated in the Firewall policy, the
FortiGate applies the destination VIP and keeps the source IP of the
sender if the traffic is going through the FortiGate on different
interfaces. But if the traffic is received ...
Description Under BGP, the '# config network' statement forces
advertisement of a prefix. iBGP should only advertise a prefix if it is
present in the routing table with an exact match.The BGP option
'network-import-check' allows to advertise a prefix...