Technical Tip: Configure a virtual server

cpagare · 12-27-2021

Description The article describes how to configure a downstream FortiGate to obtain the IPv6 prefix and DNS from an upstream DHCPv6 server through FortiGate GUI. Scope Solution In this scenario, a DHCPv6 server is connected to FortiGate A via an upst...

cpagare · 11-30-2021

Description The article describes the steps to import address objects and create groups using scripts. Scope Solution Configuration from GUI: By using the bulk command option, the address objects can be imported to a group, the same can be done under...

cpagare · 09-20-2021

Description This article describes how to configure a virtual server. Scope FortiGate.Solution From the GUI: Go to System -> Feature Visibility and enable 'Load Balance'. Go to Policy & Objects -> Virtual Servers and select 'Create New'.The virtual s...

cpagare · 02-22-2021

Description The article describes how to configure the password policy for locally defined administrator passwords and IPsec VPN pre-shared keys.Scope FortiGate. Solution Configuration from GUI:To create a system password policy from the GUI: Go to S...

cpagare · 08-26-2022

For traffic logs, please cross-verfiy if the policies have log "All sessions" enabled or not. To verify the Forward Traffic logs, "All sessions" in the policies need to be enabled. Please also check the below settings, you can enable the type of logs...

cpagare · 08-26-2022

You can collect traffic logs and packet captures at the time of the issue, below is the document of IPsec VPN troubleshooting: https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Troubleshooting-IPsec-Site-to-Site-Tunnel/ta-p/195672 https...

User Statistics

User Activity

Technical Tip: How to configure a downstream FortiGate to obtain the IPv6 prefix and DNS from an upstream DHCPv6 server.

Technical Tip: How to import address objects and create groups using scripts