We have a Fortigate 200D running the 5.0 firmware. When I use the Packet
Capture, I notice some odd behaviour that I do not understand and wanted
to know if this is normal or is there a problem. I select the Packet
Capture option via the GUI. System ...
We have a Fortigate firewall in active/backup configuration running
FortiOS 5.0.9. TL;DR Firewall intermittently stops passing https packets
from iPhone or iPad with message on the firewall of "no session
matched". Just posting this here in case anyo...
Fortiauthenticator 400C in Active/Standby
Configuration.v3.00-build0121-20141128-patch00 Is there a way to detect
a Fortiauthenticator failover from the active unit to the standby unit
using SNMP polling or traps? I have looked at the various Fortine...
Fortiauthenticator supports SNMP, but it did not support HA monitoring
back then. From version 4.0, the Fortiauthenticator supports SNMP traps
as follows: [ul]CPU usage is highMemory is lowInterface IP is
changedAuth users threshold exceededAuth grou...
It turned out that a routing change had been made on the network so that
some packets were being routed on the firewall, whilst others were being
routed on one of the routers. This created an asymmetric routing
scenario that caused the issue. Once we...
Hi Vjoshi, Thanks for your helpful reply, it is appreciated. We have
done some further investigation this afternoon. It seems that when
packets are going from client to server they are being routed through
the firewall, however, when the replies come...