Hello all,Hopefully someone will have some insights on this issue.As
many of you may know, many mail servers for large organizations check
dns / reverse dns match to the IP address of your email server. The
problem I am having is that the Fortigate 1...
Hello,I have a problem with this error: 2016-11-20 21:44:11
device_id=FG100A2906501673 log_id=0101023003 type=event subtype=ipsec
pri=error loc_ip=xx.xxx.xx.xxx loc_port=500 rem_ip=216.218.206.74
rem_port=13214 out_if=wan1 vpn_tunnel=unknown
cookies=...
Hello All,I have a Fortigate 100A (yeah I know it's old but it is in
great shape with low hours on it). Firmware VersionFortigate-100A
3.00,build0247,060417 I have a virtual IP set up to allow access to our
mail server on the inside and created Firew...
Update:An engineer on spiceworks helped me find the solution. In order
for the Fortigate to use pass along the outside IP of the internal
resource rather than the outside interface of the FW, you have to go
into Virtual IP and create an IP Address po...
I would add your own PC IP to the Fortigate Address List and the Group
and test Telnet to port 25 on the email server (again you may need to
add IP to the connection control of the SMTP on Exchange). If you reach
the banner on the email server, your ...
So is the Barracuda able to send mail through now? One thing I did when
working to get mine working is to add my address to the Address List so
I could test Telnet to port 25 on the mail server. That is how I found
that the internal FW IP was being p...
In terms of redundant internet connections the sub-netting is irrelevant
in terms of public or private sub-netting for the outside interfaces.
What Fortinet devices you have so we can find the proper configuration
settings?
I am not Familiar with the 300D but I just set up the same set up for my
client on a 100A. Spam Filter Service -> Through Firewall -> Internal
Email Server. In my configuration only the spam filtering servers come
through on Port 25. So I created VIP...
