I hope self-promotion isn't frowned upon and, if it is, feel free to
remove this thread. I've been working on a tool over the past few years
and have just updated it to the latest version. It's aimed to help
people capture packets, run debugs and (ev...
Hey firewalled, From what I understand of Windows and NBT, the
broadcasts for Workgroups won't leave a subnet so as long as your VLANs
are independent links (which they have to be), they won't see each
other. If you want to access them by name, you'l...
Hrm... Okay. Without your config, I've got one last idea. Run the
following commands. Replace 1.2.3.4 with an external host that you can
test with which you will only use for this test - We don't want to
capture any traffic which isn't destined for y...
Oh, one other thing to check... When you set up the VIP, did you specify
that it was PAT and not NAT? On mobile right now so I can't check but I
believe the option is just called "Port Forwarding" in the VIP object.
*EditSo I'm back in front of a box...
Did you still get the login page when you disabled NAT? Is it still set
to disabled? Make sure it is disabled for the next test. Run a PCap on
the server interface: diag sniffer packet port1 'host 10.20.30.40 and
port 443' 6 10 Replace 10.20.30.40 wi...
Hey m84_2019 Just had a thought... Do you have any NAT applied in the
firewall rule for you inbound traffic? If so, disable NAT and it should
work. Sean (Gr@ve_Rose)