Hi.I've a strongswan server and a Fortigate 50E device running v6.0.9.
This is the configuration on the fortinet side In strongswan I
have:config setup charondebug="ike 3, knl 3, cfg 3, net 3, esp 3, dmn 3,
mgr 3" uniqueids=yes strictcrlpolicy=no con...
Hi.Since when I've upgraded my FortiClient installation on MacOS I'm
unable to connect to a customer's SSLVPN. All I get is a generic unable
to connect message, I tried downloading debug log from preferences but I
see nothing. I'm sure the VPN is wor...
I managed to get it working by creating a new secret and pasting it
directly into the GUI and in ipsec.secrets. After that P1 was up, still
mismatch for P2. I changedesp=aes256-sha256-modp3072and finally both P2s
were up. Thanks again for the help
I've upgraded to 6.2 but things seems to be worse now: strongswan is
unable to find PSK.I tried different formats of ipsec.secrets but it's
unable to find it: 53:74:65:6c:cc:bc : PSK "abc"@forti_public_ip : PSK
"abc"Stelle : PSK "abc"%any : PSK "abc"...
I finally was able to have a look at this again... Unfortunately without
success. I did some minor changes to your config:* used rightid and set
the corresponding on the firewall* had to omit set net-device disable
because the device I'm currently te...
Thank you very much for your reply. I picked the configuration from
Strongswan examples. Also I found there are these limitations, that's
why I did a single ipsec config with both subnets. I will try a fresh
config based on your suggestions, will let...
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.