Same problem here with an Arris tg3442de DOCSIS 3.1 cable router in
bridge mode and a 60E. If auto-negotiation is enabled, max downstream is
~110MBit/sec. If we place a gbit switch between the 60E and the Arris,
we get 800-900Mbit/s (Cable speed is 1...
Upgraded 2 60D's to 5.4.0 and got several problems. 1. IPSEC VPN to
Cisco leads to VPN connection, but traffic goes through only for a few
seconds, than stops (broken pipe). Nothing in the logs. Downgraded the
affected device to 5.2.6, everything wor...
HA wrote:First, I create an admin profile with NONE privilege.Next, a
create a user 'called it PING' with the NONE profile and NO IP
restriction (to allow ping from everywhere).Next, I limit the admin user
to specific IP Range.The external user can s...
nothingel wrote:In my case, I found no reason to explicitly allow
ICMP-type traffic in the local-in policies. I would be interested to
know if your testing revealed anything that I perhaps overlooked. You
mean other ICMP traffic than PING and TRACERO...
nothingel wrote: Presently, I've moved the administrative ports back to
their defaults but use a local-in policy (CLI only) to first exempt
trusted IPs followed by another policy to block all access to the
administrative ports. Now, nobody except tru...
