Hello All, I am in desperate need for assistance. I have an 80C as my
perimeter firewall, and an ASA 5505 directly connected behind it.
[Internet] > 80C > ASA (DMZ) Previously, the 5505 used to be the
perimeter, and users would connect with AnyConnec...
No difference, both are 1500. //FGT# diag netlink interface list | grep
wan1 if=wan1 family=00 type=1 index=4 mtu=1500 link=0
master=0#------------------------------------------------------------//ASA#
sh int outside | grep MTU MAC address ****.****....
WAN shows no errors. DMZ doesn't have any error information. I have
attached the SSL VPN config, as I don't necessarily want to attach my
entire config. Please note that the ISP connection is a residential
connection (this is an off-site lab at my ho...
Anyone have any insight into this? I will note that I realized I never
PAT'd UDP 443 for DTLS, so the AnyConnect VPN throughput is up to about
25mbps download and about 15mbps upload, but I would rather use
FortiClient and remove the ASA's VPN altoge...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
