Technical Tip: Adding multiple DNS suffixes to SSL...

FJT_FTNT · 06-05-2020

Description This article describes commands that can be used to add multiple DNS suffixes/domains to resolve host names when connected to an SSL VPN/IPsec dial-up VPN tunnel. Scope FortiGate.Solution This configuration option is not available in the ...

FJT_FTNT · 09-18-2017

Description This article describes when IPSec Phase 1 DH group is selected 1, 2, or 14 on FortiClient Android, IPSec VPN connection cannot be established. This is a known issue. WorkaroundFortiClient Android's IPSec Phase 1 DH group default value is ...

FJT_FTNT · 08-14-2016

Description Packets are lost during phase2 rekey when using NP offloading.This article explains possible solutions to avoid packet loss. Solution In transparent mode, the FortiGate learns MAC addresses and creates the forwarding database (FDB).The pe...

FJT_FTNT · 11-27-2014

Description This article provides a sample configuration for DNS-based FortiGuard web filtering. Scope FortiGate. Solution Topology or network layoutPC---(switch)FGT-111C(wan1)---InternetStepsCreate webfilter profileCLI sample: config webfilter profi...

FJT_FTNT · 11-27-2014

Description This article describes that when the Administrative Status of Network Interface is changed, 'Interface [interface name] is brought [up|down]' is recorded in the crash log. The same logs can be observed when a reboot is executed on the For...

User Statistics

User Activity