Hello, I get really strange problem with my Azure tunnel on Fortigate
60E (FortiOS 5.6.8). I have configured tunnel according to this
article:https://cookbook.fortinet...pn-microsoft-azure-54/ I have set up
tcp-mss sender and receiver for 1350. Tunne...
Hello,Is that possible to create IPv4 policy using LDAP groups as
source? Currently I have configured FSSO, and I am using AD groups as
source in IPv4 group policy (e.g group "Group1" from active directory
include user1, user2, and I create IPv4 poli...
Hello,I am trying to configure SSL_Portal on dedicated public IP
address. Currently wan1 IP is 91.x.x.30/32 and I added vlan interface
(vlan id 1) to wan1 physical interface and I configured IP:
91.x.x.25/32. When I change interface in SSL_Portal to ...
What do you mean adjust mtu on interface that tunel is going out of? wan
interface (that ipsec tunnel is connected with azure) or for example
internal2 physical interface that I was performed test to virtual
machine behind azure? Can you suggest chan...
Summarizing for this moment there is one solution? ede_pfau wrote: hi,
and welcome to the forums! There is no setting for specifying the IP
directly. Instead, you could try to use a VIP with port mapping:
Firewall objects > Virtual IP > Create new ex...
Summarizing for this moment there is one solution? ede_pfau wrote: hi,
and welcome to the forums! There is no setting for specifying the IP
directly. Instead, you could try to use a VIP with port mapping:
Firewall objects > Virtual IP > Create new ex...
I used /32 netmask because while creating vlan on wan1 interface appears
invalid subnet. Fortigate is connected to BGP directly (RJ45 without any
vlan, BGP reach 91.x.x.x/24 netmask). I am trying to create any type of
interface and later choose it in...
