I cannot seem to get SSL-VPN working in a dual stack configuration. The
clients get an IPV4 address from the pool but they do not get one from
the IPV6 pool. IPsec VPN works fine in a dual stack configuration once
an appropriate configuration for IPV...
I have a new Fortigate 60D which I am running in NAT for IPV4 and NAT66
for IPV6. I have successfully tested IPV4 and IPV6 connection to the
internet. I also have a IPV4 mail server set up with a virtual IP and
corresponding IPV4 policy which work fi...
Yes, this issue still persists for connecting from a Windows Server 2012
R2 x64 machine. I am running a Fortigate 60D with Firmware V5.2.1 Build
0618 and FortiClient V5.2.1.0605. This is a FortiClient issue as I can
connect to the firewall from Windo...
Here is the IPV6 policy edit 6 set srcintf " wan1" set dstintf "
internal" set srcaddr " All IPV6" set dstaddr " Bryan Server IPV6" set
action accept set schedule " always" set service " SMTP" next Here is
the IPV4 policy edit 2 set srcintf " wan1" s...
Here is proof that the VIP6 does not function correctly. Create VIP for
IPV4 config firewall vip edit " Bryan Server IPV4" set extip
12.174.50.187 set extintf " wan1" set mappedip 10.10.0.50 next end now
telnetting to 12.174.50.187 id=13 trace_id=202...
I still want to run NAT because it separates the internal IP' s from the
external IP' s and allows me to selectively implement external IP' s
that map to a certain server. The internal network is static private
addres space of /64 with a unique guid ...
The 2001:1890:1222:900::32 is part of a 2001:1890:1222:900::/56 real
IPV6 subnet from internet provider The fd03:cd22:4796:9a9d::32 is part
of a fd03:cd22:4796:9a9d::/64 internal private IPV6 subnet and there is
a static route in the routing table ::...
