I cannot seem to get SSL-VPN working in a dual stack configuration. The
clients get an IPV4 address from the pool but they do not get one from
the IPV6 pool. IPsec VPN works fine in a dual stack configuration once
an appropriate configuration for IPV...
I am utilizing the latest FortiClient (18.104.22.1680) with only the SSL VPN
install. I am unable to establish an SSL VPN connection with this OS as
it hangs at 98%. The Fortinet unit is a Fortigate 60D with 5.0.6
firmware. This problem is particular to ...
I have a new Fortigate 60D which I am running in NAT for IPV4 and NAT66
for IPV6. I have successfully tested IPV4 and IPV6 connection to the
internet. I also have a IPV4 mail server set up with a virtual IP and
corresponding IPV4 policy which work fi...
Yes, this issue still persists for connecting from a Windows Server 2012
R2 x64 machine. I am running a Fortigate 60D with Firmware V5.2.1 Build
0618 and FortiClient V5.2.1.0605. This is a FortiClient issue as I can
connect to the firewall from Windo...
Sorry I had forgot to mention that I had tried firewall disabled already
which would have successfully connected if it was a fire wall issue.
Here are some FortiClient log snippets which show some interesting
issues: 1/13/2014 10:10:28 AM Debug VPN F...
I get the same results on Windows Server 2012 R2 which is I assume what
you meant. I' m using the latest SSLVPN client of V4.4.2294. It has
never worked so far and neither does the latest FortiClient V5.0.6 which
claims compatibility. This used to wo...
Here is the IPV6 policy edit 6 set srcintf " wan1" set dstintf "
internal" set srcaddr " All IPV6" set dstaddr " Bryan Server IPV6" set
action accept set schedule " always" set service " SMTP" next Here is
the IPV4 policy edit 2 set srcintf " wan1" s...
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.