Hello everybody, I have been struggling to get this done for about three
days with no result, i have Fortigate 501E, Firmware v5.6.0. i have 2
ISP connections each one with different public IP ranges, ISP A with
public subnet X.X.X.X/X is connected d...
Well, you really saved my day now with the three default routes with
different priorities and same distance , everything works fine and i can
sleep well Thank you sir. But im little bit disappointed because reverse
path check never looks in the polic...
Well, I created a second static route as follows config router static
edit 15 set status enable set dst 0.0.0.0 0.0.0.0 set gateway
10.100.100.1 set distance 20 set weight 0 set priority 0 set device
"Main Link" set comment '' set blackhole disable s...
well, my default route will point to the first link (x.x.x.x) which is
0.0.0.0/0 => X.X.X.1/X. After running debug flow, i found that the error
was "reverse path check failed, drop". after alot of digging and reading
KB articles i found out that Fort...
