I have wan link load balance configured on this FW, when i try to enter
default route with higher distance for the third wan link on port3 , i
get an error . config router static edit 6 set gateway 202.1.1.1 set
distance 50 set device "port3" next en...
As you are aware ,when we implement authentication on policy , when the
user goes to a public website , he gets a page prompting for
username/password.if the user request an https site then the
authentication response is also in https. since the page...
is it possible to use a verisign (or any other CA) for SSL
inspection(web filtering, appcontrol) , in order to get rid of annoying
certificate warning on https sites when using the inbuilt fortigate CA
ssl proxy certificate.If yes what type of certif...
Workaround is to remove virtual-wan-loadbalance route and use two
default routes with equal cost each on wan1 and wan2 and then add any
other default routes required.I still needs to test it though.
This is a known and open bug#258977.Default route when Virtual WAN
Link/WAN Link Load Balance is enabled When Virtual WAN link is enabled
and a default route exists for the VWL, you cannot add another static
default route entry for another interface ...
Thanks gschmitt for the reply , I have already applied these commands,
as explained here
http://kb.fortinet.com/kb/documentLink.do?externalID=FD35120 On
Fortigate CLI Configure Fortigate unit to use the newly imported
certificate HTTPS admin access. ...
I am facing this issue, I have a COMODO CA public cert for
authpage.mydomain.com and this dns points to Lan IP of fortigate. When i
try to access https://google.com for the first time from an
unauthenticated client, it redirects and throws a warning ...
