Greetings. I have 2 FG 100E, 2 FS448D (aggregation), and 4 FS12E
(access). All switches are assigned IPs from Fortilink range. Configured
vlans are: 10, 20 and 30. Our client wants a second IP for management in
every switch. Such IP must belong to vl...
I guess you found out the answer, but anyways. Just for the record.
Portchannel on equals static LAG in Fortiswitch. I had many problems
trying to make both work in LACP Active-Passive or Active-Active. Even
Cisco switches have some differences when ...
Hi there. I don't know if this will help you or not. I have a L2/L3
Fortiswitch. For some vlans it works as a L3 switch, but L3 for others.
For L3 I configured the vlan in System --> Network --> Interface -->
Vlan, whre I'm asked to enter an IP apddr...
fsw_user wrote:Will the users that manage the switches from vlan30 also
be on vlan30? Then no additional policies required I think. Yes, users
will be on the same vlan (vlan30), but switches don't have an IP in that
vlan. They have their IP on fortil...
