Ive re-done this thing 3 times now and still no go! :) At the office,
80C(v5.2.6). At the data center 200B(v5.0.12). I have the VPN setup, the
policies setup and the routing setup. The VPN monitor is showing as up
at both ends. I can also up/down the...
Hi There, We are running v5.2.5 on one of our branch office 80C's and i
just noticed that the fan has stopped working. This unit is outside its
warranty, so is it just as simple as chucking in a new fan the same
size? Thanks. Simon
Hi There, Im using one of our (now) redundant 80C's on my home fibre
connection. We are using 5.2.1. and it is connected to a IPS-supplied
fibre ONT. We have had a couple of outages lately... and seeing this in
the logs. This appears when we are expe...
Hi There, We are trying to develop a custom IPS Signature to assist in
protecting brute force login attempts. We would like to match a URL
(e.g. a_login_page.php) if it is accessed X number of times within X
number of seconds - and then be able to mo...
OK! lets put my dumb ass nubie hat on! ^dumbassnubie: lets try making
sure that xxx.xxx.127.0 is actually the correct IP :) i must have cut
and pasted it everwhere after getting it wrong in the first place!!!!
LOL.. Thanks for all your assistance. Si...
neonbit wrote:I don't believe NATing will be required for now, the
problem is that the 80C is not even matching a policy to send the data
across... it's weird. We have just moved the office location. A strange
thing you mention that, i had pre-config...
neonbit wrote:Hi Simon, Thanks for that, it looks like a policy issue on
the FG80C is causing the problem (the routing looks fine). I would
recommend double checking the values of VPN-DC-Network and
VPN-Office-Network and confirming that the IP addre...
OK, further to this - i have enabled the debug log from a workstation on
the office side (192.168.1.10) to a server at the DC end
(xxx.xxx.127.38). The main message is "Denied by forward policy check
(policy 0)", so i understand that in theory there ...
neonbit wrote:Have you performed a
[link=http://kb.fortinet.com/kb/documentLink.do?popup=true&externalID=FD30038&languageId=]diag
debug flow filter [/link]on the traffic? Ifso are you provide the
output? Not as yet - i will get that ASAP. neonbit wro...
