Hi folks, I'm a bit new to this, so hoping someone can help. I have our
SSL VPN set up and working decently well: remote clients can access
internal the (single) internal network resources, and also split tunnels
through to external resources (e.g. A...
Well, I feel dumb :( The combination of dropping the firewall and
ensuring a policy from internal -> ssl.root did it. Added a rule on the
local firewall to allow traffic from 10.0.0.0/8 and I'm golden. Thank
you for the help, Toshi!
Hi Toshi, First off, thank you for the help. You have no idea how much I
appreciate it. Next - I realized my VPN'd machine was connected to the
internal WiFi, and so had both an 10.0.1.0/24 ip (on wifi) and
10.0.2.0/24 ip (from sslvpn). Doh :( I've s...
Hm, I'm not sure I'm following entirely :\ >> If it's the real subnet at
the remote location, you need to change it. Do you mean that I need to
change the subnet on the remote pc to 10.0.2.0/24? Where/how would I do
that? (remote machines _should_ be...
Oh, I missed that -- thank you. Here's the route table on the remote
machine: IPv4 Route Table
===========================================================================
Active Routes: Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0...
Hi Toshi, No particularly good reason - it's just enabled by default so
haven't messed with it :\ I've disabled it for ssl.root -> internal,
with no change :(
