I recently did the firmware upgrade from 5.6 to 6.0 and I'm seeing much
poorer performance than before the upgrade. We've got a 25Mbps
symmetrical feed over fiber and my total throughput has dropped to
10Mbps. When I bypass the FortiGate and connect ...
Fortigate 30E, 5.4.3 I have FTP configured using the cookbook example
and I'm able to connect if I use active mode, but in passive mode I'm
unable to retrieve a directory listing, or pretty much anything else.
"That's simple" I thought, so added a Vi...
A reset gets me back to normal memory usage, for a while. Right n ow I'm
back up to 87% and in Conserve mode. :(A quick "diagnose test
application wad 99" took me to 66%, I wonder if my 6.2.1 is an early
release (v6.2.1 build0932 (GA)) that didn't ha...
Still seeing them in 6.2.1 on my 30E. Had to reboot this morning when no
one could access the internet. Memory usage seems stable at 65% now, but
was at 98% before the reboot. 6.2.1 has been installed for a couple of
weeks or more.
Hi Prab, sorry for the slow response I'm OOP every other week.
inbandwidth and outbandwidth are both set to 0. I am not using traffic
shaping on any policy that I know of and I don't believe I tried it when
getting some of the other functions up and ...
Local Logging is set to Memory with Send Log to FortiCloud on as well.
From the graph it looks like we're using around 15MB per day on active
workdays. It's uploading the logs every five minutes so I don't expect
that bandwidth usage has any effect o...
The get returns speed: auto, I changed to 1000full with no difference in
speed. I then id the diagnose debug commands and retested with again no
change. :(