Hi guys,I created a specific SSL-VPN Portal for a specific group of
people and I configured it just to use the web-Mode. Everything is
working fine, but the issue is I'd like to apply some web filters for
these guys to restrict the access just to som...
Hi guys!!I wonder if there is a chance to configure the IPv4 policy with
the Collapse all "option" by default. In my opinion would be really
useful. Thanks!!
I found out that the traffic generated form web-mode VPN-SSL is not
coming from ssl.root.I tried to figure out which is the source interface
for the Web-Mode connections but I didn't find anything in your
documentation. any clue guys?Thanks.
I noted, sniffing the traffic, that the source IP when I connect with
VPN WEB-mode is the IP client, and it's not assigned for fortigate like
if you connect using the FortiClient and the source interface is WAN1
and not root.SSL
Everything that you say was fine. But finally, I found the issue. The
addressing that you use in the ends of the tunnel has to belong to the
addressing which is configured to pass through the tunnel (phase 2).Now
all is working, thanks for the help!!...