After enable WCCP the output changed Any reason the session by not
hitting the rule herewith the diagnostic outputid=20085 trace_id=533
func=vf_ip4_route_input line=1596 msg="find a route: flags=00000000
gw-10.32.45.254 via dmz"id=20085 trace_id=533 ...
Hi All, Is there any command to show the log upload percentage? If the
log unable complete before next office hours, what is the command to
kill the schedule job? Thanks
Hi All, I have 2 different location device 100D and 600C both device
configure with same configuration according to KB. 100D- did challenge
authorization- successful overwrite user profile debug log
fnbamd_tac_plus.c[507] parse_authen_reply-authen re...
Successful to allow solarwind NCM access to fortigate once I tag the
user id to accprofile super_admin. Due to security reason, I'm plan
allow NCM access to fortigate collect running configuration and
configure "set console-output standard" I tried t...
Hi EMNOC, Go through the proxy KB, the port unable support WCCP although
allow to configure and the WCCP is up. By change the proxy port, it
shown up Thanks
emnoc wrote:Q: what traffic are you trying to send to WCCP proxy?
service-group 90 as you shown above is not for HTTP or HTTPS or 443 so
I'm guessing it's a custom service-group. Yup, we tried to send it to
cache server. Do you mean there is a custom...
Hi All, Debug logbeforeid=20085 trace_id=2077 func=print_pkt_detail
line=4478 msg="vd-root received a packet(proto=6,
10.10.10.1:50315->157.240.10.35:443) from internal1. flag , seq
2021934820, ack 0, win 8192" id=20085 trace_id=2077
func=init_ip_ses...
policy 2 is permit ip any any WCCP- L2 WCCP- perform diag wccp with
positive result- cache server wccp status is ready Configconfig system
wccpedit "90" set router-id 10.10.10.254 set group-address 0.0.0.0 set
server-list 10.10.10.212 255.255.255.255...
Override accprofile is different from challenge authorization.override
profile just to allow the shell profile to be override existing
administrator profile.
