Hi beautiful people, i need again your help. I have to create from
scratch an infrastructure in this way: Rack 1Fortigate 90D ( DMZ mode
)Switch HP ( with different VLANs like 192.168.100.1[management],
192.168.200.1[services] ) Rack 2Fortigate 90D (...
Hi guys, i am new in this forum and this is my first thread. Firts, i
would thank you for your amazing work here, because i solved a lot of
problem thanks to your support. This time i can't find a solution to my
problem here and i need your support. ...
Thank you all for your replies. :) at this point, i have another
question: is it better connect to the second FW with a Switch or
directly with a server? My need is that before to connect from network A
( DMZ ) to Network B ( LAN ) i have to protect ...
Hi sw2090, i really appreciate that you answered me really fast! :) With
the DMZ-mode i only wanted to explain the topology of the
infrastructure. "You will need a vlan trunk from the switch to the FGT
in each Rack. Done! You will need to set up a vi...
Sorry fot the delay! But i was very busy! It works using NAT in the
configuriation of port WAN 1 and connect the cable in this way:
Fortigate port Wan 1 connected to a normal port Modem LTE ( dhcp enabled
) Thank you everybody Mike
Hi Toshi, thank you for your reply! Tomorrow i will try to connect the
wan1 cable from the fortigate to one of the LANs port in the LTE Modem
and i will try to test as you said. I will keep you updated. Thank you!
Mike
