I am currently running 5.6.12 on my 100D. Now that 6.4 is out, even if
it is not for the 100D, I am wondering is it time to upgrade to 6.0.9?
or is 6.2.3 better? I would follow the upgrade path. I have read about
some memory leak issues in the 6.x se...
Hello, I have a Cradlepoint with dual sims that I would like to VPN into
my foritinet 100D. I have it working perfectly for the first sim. I am
wondering if I can have the second sim use the same VPN connection as
the primary sim? Each sim has a diff...
My ISP has given me a static /48 range of IPv6 addresses. I enabled IPv6
and gave wan1 an IPv6 address and was able to ping6 google.com. I gave
my LAN interface a IPv6 address, added a static IPv6 route, setup my
windows 2016 DHCP server to give out ...
I am a believer of if it ain't broke don't fix, but I don't want to get
to far behind either. I didn't know there is a lifespan on the firmware.
Where can I find that document?I would only switch to 6.0.9 or 6.2.3,
following the upgrade path. I am th...
AT&T has told me that the router is setup correctly and the problem must
be with the firewall. I have given the wan1 interface the IPv6 address
of 2001:1111:2222:8a00::2131/64. From my cell phone, I can ping6 the LAN
side part of the router 2001:1111...
This is what I have run:# diag sniffer packet any "host
2001:1111:2222:8A02:a46c:a914:3e9b:a2a6" 4 0
linterfaces=[any]filters=[host
2001:1111:2222:8A02:a46c:a914:3e9b:a2a6]2017-10-19 16:47:12.158864 lan
in 2001:1111:2222:8A02:a46c:a914:3e9b:a2a6 -> 2...
I assigned the addresses out of the /48, except for the IPv6 default
gateway which came from the ISP.I forgot to mention that I have a
fortigate 100d running 5.4.7.I will post the commands I ran and their
results shortly.
