I have it setup that FAUTH is configured for Remote LDAP with my W2012R2
AD server, Everything is working as intended after many hours of
troubleshooting issue after issue. So here is my issue. My group that I
poll form AD is Network Administrators I...
Hello everyone, My radius device is a MAG2600(UAC) My Firewall Is a
Fortigate 100D, I am having a hard time getting radius setup for admin
login into the FW itself. I know my issue is more so on the MAG2600 and
the VSA dct file i have to manually con...
Hello everyone i have been researching multiple forum posts on my
scenerio and i found a couple that are kind of like it but nothing that
says best practice or for mu situation the best way to do it. We have
purchased 100D's and have them in a HA clu...
This is what the Fortinet.dct file should look like
############################################################# # #
Fortinet specific parameters # # MACRO Fortinet-VSA(t,s) 26 [vid=12356
type1=%t% len1=+2 data=%s%] # ATTRIBUTE Fortinet-Group-Name
F...
The fix is in the MAG2600 Radius.dct File this is the Defualt the
MAG2600 provides, you need to add line#362 MACRO MS-VSA(t,s) 26 [vid=311
type1=%t% len1=+2 data=%s%] line#363 OPTION bundle-vendor-id=311 Once
this is done then the Fortinet DCT file w...
Hello, I got this figured out. 1. set a secondary IP address on the Wan1
connection with IP 98.x.x.254/242. On my Policy from Internal to
External on the Nat part i did a dynamic IP pool and set its range as
98.x.x.254-98.x.x.254.I setup a Laptop on ...
Hello, Ok ill try to explain this another way, ISP router > FW
67.x.x.x/30 P2P, ISP has a Static Route that says 98.x.x.x/24 next-hop
67.x.x.x/30 FW L3.FW > has 2 L3 assigned on 1 WAN Link 67.x.x.x/30 &
98.x.x.254/24WE have multiple branch offices th...
Hello, The ISP has a Static Route that says 98.x.x.x/24 next hop
67.x.x.x/30 which is our P2P connection on our FW to the ISP router. so
the /24 is carried over this /30. 1. If all of our VPN's now terminate
to the 98.x.x.254 address i would think i ...
