hello to everybody, I have two Fortigate 110C in HA cluster. I have
update the firmware from MR1 to MR3 on Forti master . I have read all
the docs about upgrade from MR1 to MR3. And I did it. after the reboot
of the master, it cannot see the slave wi...
hello to evrybody. I have a cluster made of 2 fortigate. sometimes I get
from logs this error from both appliance: Heartbeat device (interface)
down - neighbor info lost I changed the cables that connect the
appliances. But I get the same errors. Doe...
hello to everybody, I have tried to downgrade the master with the same
firmware version of the slave. after all, the master and the slave didn'
t see each other. I have read that the cluster unit should synchronize
each other once the firmware have t...
thanks to all for the replay! in the cluster I have only the master in
the cluster. the slave is disconnected from the cluster, insn' t? I
entered on the by avocent on slave by CLI. I have seen the slave is on
the version MR1 patch10, so it did an up...
hi, thanks for the replay. Actually the forti unit istoo farway from me!
I have an further information then the message I posted yesterday. I
processed the following steps for upgrading the forti cluster: I
upgraded on forti master from v4 MR1 patch ...
