I searched the forums and saw different things and just got more
confused. LOL Here is our current set up (simplified). We have fortigate
200E at two sites. We have S2S VPn between the sites that are always
active. We also have an MPLS circuit betwee...
See attached for current. The connection from the MPLS router (carrier
router) would be placed in the FTG. I assume what I need to do will be
to contact the carrier to change the IP of the MPLS router side to a new
range and use that range for the FT...
Because when I try to add the MPLS to the FGT I have to give the
interface an IP address. The current vendor side has an ip address on
our subnet and it is connected to our core switch. I cannot add the
interface to the FGT because the ip address wou...
I guess the questions I am having are in regards to connectivity. The
MPLS will physical plug in to the FGT but I am not sure the IP of that
interface can be the same as the current LAN subnet.. can it?
Not looking to merge paths as we will be removing the MPLS circuits next
year and moving to SD WAN or something like that. The MPLS is horrible
for us. Any ways to understand what you are saying... Don't get on me
about the IPs this was done prior to...
