Hi experts, We are using fortigate 80C with firmware
v4.0,build0328,110718 (MR2 Patch 8). Help me out how to block facebook
and all its apps for all users except a few. After reading the post did
some home work, but in vain. Please help me out!!!!!!!...
Hi Experts, Am using Fortigate 80C with Explicit Webproxy enabled and
running on 8080 port. Now, all of a sudden, all the machines running on
the web proxy, not getting Internet. No configuration changes have been
made. Need to resolve this on priori...
Team, As the subject line says... I want to create a NAT as follows.....
public IP:1935 ---> Pvt IP1:1935 , Pvt IP2:1935, Pvt IP3:1935 and so
on.. How can I achieve this? Thanks in advance. Bain
Hello All, Got Fortigate 80C unit. All of a sudden, my internal 1 port
started sending ip conflict to the machines in my network. This i found
in the affected machines event viewer. The event viewer throwing a
message stating that this ip is used by ...
Team, How do i configure my fortigate 80C to resolve 2 urls running on
different servers in my private network. for example (www.abc.com and
www.xyz.com) And i have only one public IP address and both the urls are
registered with different registrars...
Hi Oh Yaw Theng, Thanks for your reply. Your assumption is right. Couple
of doubts to complete it... 1. I didn' t find any application sensor in
my fw as it is running on firmware v4.0,build0328,110718 (MR2 Patch 8).
2. If I need to allow only 2 IP' ...
10.44.71.1/25 (255.255.255.128) (location b) traffic is routed to
10.44.71.129 which is a port configuration in location A l3 switch. and
the traffic from location will be routed to 10.44.71.1/25 (location b)
Team, Thanks for the speedy response. Will check again the
configuration. BTW, I enabled webproxy in the firewall for some users
which are at a far location. The ip is using for webproxy is the same
internal ip. Is that creating issue? just got the t...