Hello, I'm having some difficulties understanding the route lookup
process when SD-WAN is enabled. According to Fortinet, SD-WAN rules
(which are policy routes) are checked prior to FIB lookup. But, knowing
there is always an implicit SD-WAN rule whi...
Hello, I've noticed that when using below configuration, Fortigate does
not use the primary server as I would expect. Like first attempt to
primary and if it fails (once or for some number of retries), go to
secondary. It seems Fortigate chooses the ...
Hello guys, This is my first post here and wanted to clarify something
in my head about the way Fortigate processes traffic. I have the
following topology. R1 ---- FGT ----R2 + this configuration: -R1 and R2
both have 9.9.9.9/32 configured as Loopbac...
Hi Ken, When using FQDNs in policies that are rapid changing (TTL =5 sec
for ex) I need basically to have a sync between the client (whose
traffic is passing through the Fortigate) and the Fortigate. Both the
client and the Fortigate are using the sa...
Hi Ken, You are correct, I was checking this on a box running FortiOS
5.4 and I don't see those commands.I checked for one running 6.2 and it
is indeed working. Thanks for prompt response Radu
I also encountered the same problem using the trial 2 week license in
EVE-NG. I went over my head to try to fix this, by changing
configuration parameters on the Fortigate and trying the same in
different browsers. In the end, I wound up connecting v...
