Multiple incoming static IPs @ WAN1, forwarding to specific servers.
VIPs / VGroup / Port Forwarding set up (No NAT), and forwarding works
internally using secondary IP (can connect to web server), but can't
access from outside... times out. My exper...
Hmmm. A different question - if these are recently added secondary IPs,
do they each have to be allowed access to get through the firewall? (as
below, and would 192.168.182.108 represents the external secondary
address? ) FGT # show system interface ...
.. I will try with the filter as you suggested..Should the secondary
address show up in this list? Is is not here... FG100D3G13802391 # get
router info routing-table allCodes: K - kernel, C - connected, S -
static, R - RIP, B - BGP O - OSPF, IA - OSP...
Should I be including any other parameters? This output looks more
promising, the redirection shows up at least - i isolated it
below..-----------diag debug enablediag debug flow filter add
65.60.xx.xxdiag debug flow show console enable diag debug fl...
Got sidetracked.. but thanks for the response. Output of these didn't
tell me much (I'm no expert) do they need to run longer? This is what I
got with a short run on the sniffer - public ip
65.60.xx.xxFG100DXXXXXXXXXX diagnose sniffer packet any '65....
