We are using PPTP VPN for accessing to our LAN, but the PPTP isnt
supoorted by iphones (anymore). So how can I configure VPN for iPhone
users. I have shecked the article:
http://docs-legacy.fortinet.com/cb/html/index.html#page/FOS_Cookbook/IPSec/cb_i...
Hi, I am having issues with a trading website, which we cannot resolve
from our primary ISP- WAN1, but its working fine from secondary ISP
(backup-low bandwidth) WAN2. How can I route the traffic to the site
from WAN2?
I need to know which filters to apply for my web server hosting couples
of sites.We recently moved our website from hosting services to our
physical servers. So I need to know which UTM filters I can apply to
protect my web site from attacks. We have...
Hi,Currently we are using dual FG-224B in HA mode. We need to update our
firewalls with new and cheaper one. (down grading our fw level)We are
looking either 60D or 90D as our replacements. Can you suggests which
have the similar performance comparin...
This is the configuration I have done: IPSen VPN Config:config vpn ipsec
phase1edit "iOS_P1"set type dynamicset interface "wan1"set proposal
3des-sha1 aes128-sha1set keylife 86400set psksecret ENC
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXn...
Do I need to have SSL certificate purchased? Or where can I generate
theSelf-Signed certificate?Forgot to mention we have very old firewall,
224B with OS ver 4.0 MR2
But looking at the specs of 224B, which looks less or almost similar
60D. and then I would have to change it within 2 years due to
End-of-Life. 224B is satisfying our current setup. We have a configured
as HA (A/P mode ). Also the company is looking ...
I tried to create a IP Range under Address. Then Created a policy under
my internal port to wan2 port. Source Interface= Internal Source
Address= 200(ip range) Destinateion= wan2 Destination=wan2_interface
NAT= Enable But the PC with the IP range is ...
