Hi folks, I'd really love to see power draw available via SNMP. A lot of
other vendors get down to fan speed and all kind of things, I think
Fortinet could do better with SNMP.
Greetings all, I'm not sure if what I'm trying to do here is out of the
realm of possibility for Fortinet gear but basically I have created a
Fortilink between a fortigate 60E and a Fortiswitch FS124E-FPOE and my
assumption is that for all the vlan's...
Hello folks, I'm working on a design at the moment for small branches
and I was looking at the 81E due to the port density meaning not having
to use a separate switch at a small branch. I've got a 60E for testing
and what I want to do is this: Connec...
I'm exactly doing this but it's horrible - you have to set the Fortilink
up, then you have to connect to the switch manually and tell the
interface that your point to point link is connected to that it's a
Fortilink interface. It doesn't make much se...
I'm also trying to figure this out - I managed to get all the SNMP
config onto my Fortiswitch that is managed via Fortilink by my Fortigate
but I can't get a layer 3 address on it to use as the source of the SNMP
traffic. I might go to TAC shortly if...
This turned out to be an incorrect cable - this site is about 4500kms
from where I am and the folks on site told me they had done one thing
but had done another, the scenario I had described and the config used
were fine. This is a cool feature.
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
