Hi Guys,Can someone please let me know if they know the meaning of the
below message. Receiving it through snmp from a FGT cluster. "The
heartbeat device failure count has exceeded the configured threshold"
Hi Guys,We have IPS sensors configured for incoming traffic from the
internet and the action is currently configured to be signature
defaults. This setting leaves around 178 critical signatures with the
action of PASS. Could someone please recommend ...
Hi Guys, I need to allow guest users access to my DMZ mail server using
the public natted IP and not the real DMZ private IP. From what I have
read on the forums about this, it seems I need to configure hair pin nat
for this to work. Could someone pl...
Hi Guys, I am trying to integrate a FortiAP 221 C with a Fortigate 600C
but I am not able to authorize the AP. I have attached the screenshots.
Could someone please help me ? Fortigate and FortiAP are running 5.2.2
Regards,Austin
Hi, I have a requirement that when a user connects to the WiFi network,
he should get a authentication page on a browser where it should ask the
user to enter his name,email and mobile number and then a one time
password should be sent to the user vi...
Hi Ipetit,Thanks for the help. I have attached the debug output here.
diagnose debug application cw_acd 1 did not give any output. Appreciate
your response.Thanks,Austin
Find out whether 60C supports redundant interfaces or not . If it does
then you can combine two interfaces into one for each zone and then have
a full mesh setup.
