Good afternoon, We have a FG-60F with 2 SD-WAN zones. The first one for
corporate use is connected to a single Starlink antenna. The second
SD-WAN zone for client use is connected to 2 Starlink antennas. These 2
apply load balancing to maximize bandw...
Hi guys, I've been trying to get IPv6 to work properly on our 30E but
I'm have a lot of difficulty setting it up correctly. On the WAN side
we're receiving an IPv6 address from the ISP and we're able to ping6 to
random IPv6 hosts: # get system interf...
Thanks for the reply. Your solution does work indeed (as this is how we
previously had it setup). The problem is that traffic needs to be setup
over the SD-WAN zones as described above, this is due to data limits on
the connections. But I have manage...
Update: The guide at
https://blah.cloud/networks/enabling-ipv6-dhcpv6-pd-pppoe-fortigate/
helped fix the issue. Specifically the following lines of code on the
LAN interface: config ipv6 set ip6-mode delegated set ip6-allowaccess
ping https ssh http ...
