Hi all, I'm having an issue with my routing and policy's on the
fortigate 800D. We are migrating from Juniper(screenOs) to the fortigate
800D. In the Juniper firewall we've created multiple virtual routers to
make multiple routing instances for other...
Thanks very much for your help! while i was running a couple test with
the diag debug i found out that traffic was denied by policy 0 (implicit
deny).This complete idiot totaly forgot to allow acces from outside to
inside, i only configured a rule fr...
I tried both ways. The idea of our topology is that our own hosts are
located in root. Third party hosts get their own vdom. See also drawing
with the current configuration. With the output of the debug i think i'm
a lot closer to the solution as i w...
While doing the debug as you said i found out something interesting. If
i try to access the ip address of the host in VdomB from VdomA he tries
to find a route through "root". if i ping the vdomb side of the Vlink he
finds his route through the Vlink...
Thanks for your help. The debug diag command does'nt get me any further.
I have my configured as above. now i made a BGP connection on the Vlink
so i cant mess up my static routes. There are no double entries in both
vdoms. there are only 2 subnets c...
Thanks Ken, i found your post very helpful. I still have one issue with
the configuration. In V-domA i have subnet 10.x.x.x/30 In V-domB i have
subnet 213.x.x.x/28 On the Vlink between both Vdoms i assigned
172.16.1.10 for vdomA and 172.16.1.50 for v...
