Hi I would like to know the best practice for configuring link
Redundancy and to distribute the Internet traffic over both links,
Currently, most of the setting was routed to the static Internet (Slower
Speed) and as intended I would like to route mo...
Hi I would need some help on this configuration, previously the system
administrator configured the FD 100D to be accessible by 1 assigned
laptop only ( not sure what type of the configuration) and other
unassigned machines (pc/laptop) when entering ...
toshiesumi wrote:GUI would probably confuse you to look at local-in
policy because those pre-defined ones are all "accept" except for the
default one.Go to CLI, then use "show firewall local-in-policy". If
nothing specifically configured, it doesn't ...
toshiesumi wrote:The first option to limit admin access is "trusthost"
config in "config sys admin".The second option would be "local-in
policy" under "config firewall local-in-policy".Check those places. Hi
Toshi san,As I check on both trust host an...
lobstercreed wrote:There are many documents on this, both on the
cookbook website and on this forum. I'll link you to a few of the
relevant ones:
https://cookbook.fortinet.com/redundant-internet-basic-failover-56/
https://cookbook.fortinet.com/redund...
