I' ve installed FAP 221B with FortiWifi 60D and used it as Controller at
some 3+ sites. Just added the APs to the network and let DHCP assign a
IP and it was found and I could authorize it. I' m on a new site and the
AP gets IP and its possible to co...
Hi, I' m not been able to find this information in a specific document -
I suppose it does exists, but anyhow: What is the minimum model that
supports the 4G modem and command set usb-lte enable ? Based on our
tests the minimum model we' ve found is ...
In a normal scenario we do not allow access from the outside, into our
network. But due to change in our organization we need to expose at
least one of our IIS web applications (with Integrated Authentication)
from the outside, of course only after f...
Hi, Does the FTG with FortiOS 3 or 4 have a similar function like the
Cisco ASA 550x' s " NAT Support for SIP" If yes, what is it called? Is
this the exakt same functionality as on the Cisco, or is' t only "
vendor specific" implementation?
Document:
FortiGate_Certificate_Management_User_Guide_01-30005-0182-20071005 (last
updated with 3.0 MR5 sometime 2007) Explains that this CLI should be
used: execute vpn certificate key export
But on my 3.0 MR7 Patch 2 I can only do: execute
vpn ...
That is unfortunately not entirely true depending on what part of Always
On VPN is intended/required (or has this changed some time in the
middle/end of 2020. Would be nice to reference a new link from Microsoft
then) https://docs.microsoft.co...on-d...
I updated the FAP to the newest firmware build 048, but no luck. Found
the webpage and that states: AC Discovery Status Discovering AC ...
Seems it cant find the Controller for some reason. But it possible to
ping 172.16.0.1 from the FAP itself so it...