I am using the FortiGate VM version and found that the built-in
FortiLink is unable to connect to the FortiSwitch, consistently showing
as offline. Could you please advise on how to resolve this issue?
thanks!
I connected the FortiAP (FortiAP-FP431F) to the lan, and the firewall is
a FortiGate VM (v7.4.9 build2829 (Mature)). I found that the FortiAP can
obtain an IP address from the DHCP LAN port of the firewall, but the
FortiAP device is not discovered in...
I configured three firewalls, with the HUB using a dial-up. One SPOKE
can communicate normally with the HUB. However, after adding another
SPOKE, although the IPSEC VPN tunnel was successfully established, the
HUB's tunnel IP cannot be pinged. Could ...
I want to back up the entire FortiGate device to FTP/TFTP, including all
configuration files, hard disk logs, etc. so that I can restore and
review the information when needed. Could you please let me know the
command for this?
Could you advise if there are any methods to diagnose the quality of an
IPsec VPN? I've noticed that the speed between my two site-to-site IPsec
connections is quite slow. However, when I switch to OpenVPN, the speed
returns to normal Could there be ...
thanks!https://community.fortinet.com/t5/FortiGate-Cloud/Technical-Tip-Setting-up-FortiSwitch-FortiLink-Management-using/ta-p/318464Setting
up FortiSwitch/FortiLink Manageme... - Fortinet CommunityWhen I followed
the instructions on this website up t...
Thanks. After turning it on, the AP can now be discovered. However, when
I connect my iPhone to the AP, I notice that it only connects to the
2.4G band. What could be causing this issue?
