Hello.I would like to have help about the "famous" DPD_failure on IPSEC
VPN. I have 2 Firewall fortigate. One in Italy (IT) and one in Germany
(DE).In Italy I have 2 HDSL internet interfaces.Also in Germany (DE) I
have 2 internet interfaces, but whil...
HelloI need help about internal routing between 2 subnets configured on
one interface. I have : 1 Fortigate 80C with Fortinet 5.0 Phisical
Interfaces : WAN 1 and INTERNALWAN 1 Interface : HDSL to Internet with a
public IP : 81.174.28.217On the intern...
Hi Ede,Thanks for your help. I didn't know in Germany they brought down
VPN on purpose. That's ok no problem.I know I have one of the interface
that is an ADSL and this kind of line is not well suitable for business
( but this is just a backup of the...
Hi Mike, Thanks for your replay .As I wrote above, I prefered using only
the fortigate configuration because I need to reach 1 PC, from one
subnet to the other. So not a big overload on the firewall interface.Am
I correct or there is something I don'...
Hi Jining, I tried your suggestion and it works One thing ... , as you
wrote, I needed to check that the " .... set the Gateway in the Pc
.....Let me explain.I have all the PC on the 33.xx subnet. I have only
some "particular" equipments on subnet 34...
Hi Jim , ... first ... Thanks you for your reply :) I could create a new
"vlan" interface for 192.168.34.1 that's a sub-interface for
192.168.33.1.Then, I need to do something into the switch (vlan and
routing) . I have HP V1810-48G.But, IF it is pos...
