How to force SDWAN IPSec VPN Down when quota reachs its end - Starlink
maritme 5TB quotaThe scenario: small office with Starlink+CG-NAT+DHCP,
FG100, FortiOS 7.4 and remote office/DTC, regular ISP with static IPI
have two Starlink antenas, with a 5TB/...
Unable to get IP from my own MS DHCP Server when using SSID in TUNNEL
MODE and VLANs The scenario: FortiAP 231F 6.4.7 on VLAN 700Fortigate
6.4.7 controller on VLAN 700MS DHCP Server on VLAN500 and several
scopes, for several SSIDs, 300, 301, 400, etc...
Fortigate 500E appears to be not load balancing throughput properly
V6.2.3 I have a 2-Nod cluster running since the launch of the 500E
hardwareOver time, sometimes, we have some sync problemsIn the last
months we were struggling with a problem relate...
All my NAT policies are configured with SSL Inspection/Certificate after
upgrade from 5.4 to 5.6I´ve just installed v5.6.9 build1673 (GA) on top
of 5.4 version After the upgrade, all my NAT policies are now with SSL
inspection/CertificateEVEN POLICIE...
200E cluster with a DISABLED/DOWN MGMT interface, configured with an
internal private IP trace from remote location, through VPNTracing route
to 10.122.1.254 over a maximum of 30 hops1 * * * Request timed out. 2 3
ms 3 ms 1 ms 192.168.200.1 3 1 ms 1 ...
Yes, sure, maybe it could be done, but now we´re talking about a
solution which requires skills that we don´t have and of course,
included that there is no budget to hire someone to do I´m puzzled by
why the "auto-negotiate" and "keep alive" disabled...
To use shaper to drop the traffic over the limite is not an option, for
several reasons: the 5TB limit is overall, for ANY traffic
produced/generated, the 5 TB limit is up+down, the traffic that goes
though ipsec has overhead not related to what is b...
