Hi Guys, I been looking at making this change for some time now but
would like some advice on the best way to get this done.I have looked
through the forums and some CB but the best advice is that from an FG
pro.our public IP in the office is 196.x.x...
Thank you for the assistance jorge.americo and rwpatterson. so to get
this working I created a new policy and had the Destination to ALL
0.0.0.0/0 (This was key to getting everything working)also my outgoing
interface was set to internal instead of u...
WG100D # show firewall policy 21 config firewall policy edit 21 set uuid
429b7a54-ce43-51e5-4620-79c140ddb751 set srcintf "dmz" set dstintf
"internal" set srcaddr "ALL" set dstaddr "All LAN
SERVERS-192.168.1.3-50" set action accept set schedule "alwa...
thanks, jorge and rwpatterson for your help. so yesterday I disabled the
split tunnelling again.I created a new policy that allows traffic out to
the internet on wan2 instead of the internal policy set.some traffic did
flow in - out and I could send ...
So when user 1 connects to the ssl-vpn he still has his public IP wich
is for eg. 105.12.x.xI am needing to set up the SSL-VPN so when user 1
connects, his IP would change to the office IP witch is 196.22.x.x Some
of our servers are sitting in AWS an...
