I am trying to create software switch and bind the SSID to tunnel
wireless traffic. As I read, it is required to have software switch to
perform internally pass traffic between VLANs. However; I have uplink
ports added to 803.ad as aggregate links to...
I have created Fortlink with dedicate to Fortiswitch checked. I setup
internal DHCP and connected POE switch with Access Point. I am getting
DHCP management address to switches but not getting DHCP from downstream
port where access point is plugged i...
I have a question regarding Radius Server with Dynamic Vlan Assignment
for SSD profiles. Basically I would like to have Dynamic VLAN Assignment
and VLAN pooling enabled. I am running 7.4.5 code version and whenever I
enable Dynamic VLAN Assignment, i...
I did figure out vlan pooling without a software switch. It happened to
to be I was configuring IP Addresses in vlans instead of sub interfaces
created addresses within the SSID that had tunneled and vlan pool
enabled. After configuring the interface...
For example, I did set SSID & Radios within Fortiap/Operational profile
settings to Tunnel mode. I created Firewall policy LAN To LAN with the
wireless management vlan 1, wireless user vlans 201 and 202. I enabled
vlan pooling round robbin within SSD...
