HiI'm currently replace a CISCO wifi solution by FortiAP one.Actually,
SSID'd are the same on all my subsite, but VLAN are different on each
subsite.For example :[ul]SITE1, SSID=WIFIINVITE on VLAN=125SITE2,
SSID=WIFIINVITE on VLAN=135...[/ul]On my fo...
HiI'm currently replace a CISCO wifi solution by FortiAP one.Actually,
SSID'd are the same on all my subsite, but VLAN are different on each
subsite.For example :[ul]SITE1, SSID=WIFIINVITE on VLAN=125SITE2,
SSID=WIFIINVITE on VLAN=135...[/ul]On my fo...
It will help, thanks :)I was thinking that LLB is only used for Internet
Traffic.Due to the number of VLAN, it's "complicated" to add so many
STOP RULES (one for each VLAN Interface, and Private subnet
(172.16.0.0/12 and 192.168.0.0/16).
Hi MikeProblem of this : All my routing table will be ignored for these
certain subnets, and intervlan-routing in ma LAN are ignored (from my
routing table).Is there a way to do this (i was thinking that the LLB
could solve my problem).Thanks for you...
HiI have exactly the same problem :Seems to work as the PBR : If the
0.0.0.0/0.0.0.0 is used in LLB rules destination, the routing table is
ignored. Somebody has a solution ?I'm in 5.2.10 FW
